TATSORB™ – The Reliable Choice for Saving Water
TATSORB™ is a high-quality and versatile Activated Carbon. The primary advantages are Amazing effects and Unique performance. PETROTAT is your leading Activated Carbon supplier with full portfolio of Coconut-Shell and Bituminous Coal based activated carbon for condensate polishing units (CPU), DM plant and waste & drinking water treatment.
Condensate Polishing (CPU):
Hot condensate is sometimes contaminated with lubricants. These oils must be eliminated as thoroughly as possible prior to reuse of the condensate, particularly in high-pressure boilers. For high oil concentrations is it advisable to de-oil the condensate using a mechanical oil separator prior to treatment with activated carbon. Fine cleaning can then be accomplished through granular activated carbon.
- TATSORB™ Advantages at a Glance:
- High Adsorption Capacity
- Cost-effective and efficient
- Low Pressure Drop
- High Adsorptive Preparties
- High Mechanical Strength & Hardness
- Full Technical and After-sales Service
Wastewater Treatment:
In wastewater treatment, activated carbon is mainly used for polishing purposes, following pre-treatment that includes solids removal and bio-treatment. Target compounds for the activated carbon include phenols, color bodies and non-biodegradable chemical oxygen demand (COD). Either GAC or PAC may be used. PAC is also used in biological PAC treatment, where activated carbon plays two roles as it both adsorbs contaminants from wastewaters and acts as a surface for beneficial microbes to attach to. The PAC adsorbs toxins that would be harmful to bacteria and in this way buffers the potential shock to the microbes from high concentration incoming loads of contaminants in wastewater.
Products & Solutions:
TATSORB™ C_SPL (AW) Activated Carbon for Condensate Polishing Unit (CPU)
TATSORB™ C_SPL (AW) is an acid washed coconut shell based granular activated carbon produced by steam activation at 900 – 1100°C by through rotary kiln process. TATSORB™ C_SPL (AW) is a super low ash activated carbon used in Condensate Polishing Unit (CPUs) where silica leaching is critical & chloride & Fe content should be minimal. TATSORB™ C_SPL (AW) meets or exceeds IS, AWWA standards as well as NSF 61 for potable water treatment.
- High Surface Are
- High Adsorption Capacity
- High Mechanical Strength and Hardness
- Size: All Standard Sizes like 8 x 30, 8 x 16 or 12 x 40
- Customized Sizing Available, Iodine Value can be adjusted as per client’s requirements.
TATSORB™ C_SPL Activated Carbon for Drinking Water and DM Plant
TATSORB™ C_SPL is a coconut shell based granular activated carbon produced by steam activation at 900 – 1100°C by through rotary kiln process. TATSORB™ C_SPL is used for drinking water treatment and ground water. Due remediation application to, it is its ease in backwashing suitable for use in DM Plant filters, Tap Water Filters, Desalination Plants and Aquariums.
- Iodine Number: 1050 min
- Low Ash Content
- High Surface Are
- High Adsorption Capacity
- High Mechanical Strength and Hardness
- Size: All Standard Sizes like 8 x 30, 8 x 16 or 12 x 40
- Customized Sizing Available, Iodine Value can be adjusted as per client’s requirements.
TATSORB™ PREMIUM Activated Carbon for Waste Water
TATSORB™ PREMIUM is a bituminous coal based granular activated carbon manufactured by steam activation of Australian coal processed at 1100 °C under strict quality control. TATSORB™ PREMIUM offers excellent adsorption properties and is recommended for removal of oil & grease, BOD, COD, phenols etc from effluent stream of hydrocarbon units. TATSORB™ PREMIUM meets IS 877, NSF/ANSI standard 61. It also meets all AWWA B604 for water treatment.
- High Surface Are
- High Adsorption Capacity
- High Mechanical Strength and Hardness
- Size: All Standard Sizes like 8 x 30, 8 x 16 or 12 x 40
- Customized Sizing Available, Iodine Value can be adjusted as per client’s requirements.